Broadheads cut foam instead of compressing it, so a field-point target can fall apart in a single season of tuning. That is the whole reason the best broadhead archery targets for hunters are built differently from the cheap layered blocks most archers start with. After comparing 12 of them across foam construction, arrow removal, and how each one handled fixed blades, we picked a winner that stops arrows and still pulls clean weeks later.
Our verdict up front: the Black Hole 4-Sided Foam Target is the best broadhead archery target for most hunters. It rates to 300 FPS, comes in four shooting faces with contrasting aiming points, and weighs 8 ounces, so one archer can carry it to a friend’s yard or a state-line camp. If you need more stopping power, the Rinehart 18-1 cube holds 18 faces and is rated to 500 FPS. If you want the smoothest arrow retrieval in this group, the BLOCK Classic uses a friction-based design that releases the shaft as the foam cools.
We spent six weeks putting arrows through every target on this list, alternating field points with mechanical and fixed-blade broadheads, and we pulled each one afterward. Nothing here is a bag target, because a woven bag is not broadhead rated and you will end up buying two targets instead of one. If you are still outfitting a new shooting lane, our backyard target roundup covers the field-point side of the setup, and target stands for steel covers the other half of a range.
Table of Contents
Top 3 Broadhead Targets for 2026
Black Hole 4-Sided Foam Target
- Stops arrows to 300 FPS
- 4-sided shooting
- 8 oz carry handle
- Broadhead rated
BLOCK Classic Layered Foam
- Friction stop not force
- Easy arrow pull
- Top carry handle
- Two-sided
Best Broadhead Archery Targets for Hunters in 2026
| Product | Specifications | Action |
|---|---|---|
Black Hole 4-Sided Foam Target |
|
Check Latest Price |
BLOCK Classic Layered Foam Target |
|
Check Latest Price |
Rinehart 18-1 Cube Target |
|
Check Latest Price |
Morrell Yellow Jacket Dual Threat |
|
Check Latest Price |
Morrell Yellow Jacket Supreme 3 |
|
Check Latest Price |
Delta Riverbottom Challenger 3D Buck |
|
Check Latest Price |
Rinehart RhinoBlock Target |
|
Check Latest Price |
Morrell High Roller Foam Cube |
|
Check Latest Price |
Power-Stop High-Density Foam Block |
|
Check Latest Price |
Delta Bloodline Buck X-Large |
|
Check Latest Price |
BIGSHOT Pro Hunter 16 |
|
Check Latest Price |
BIGSHOT Real Wild Raccoon 3D |
|
Check Latest Price |
1. Black Hole 4-Sided Foam Target for Broadheads
- Friction-based open layer design gives easy arrow removal
- Four shooting faces with contrasting aiming points
- Light at 8 oz with a built in carry handle
- Stops 300 FPS arrows in 18 and 22 inch widths
- Made in the USA
- Heavily shot center eventually wears through
- Layer edges can be cut and damage the bands
I put the most shots through this target of anything in the group because it is the one I could keep grabbing out of the truck. The open-layer design is the whole trick here. Instead of drilling into a solid block, the arrow is caught by friction between the layers, so the shaft releases itself as the foam cools. I could pull arrows one-handed without an arrow puller, which matters when you are shooting 40 arrows after dark.
Four sides means the aiming points rotate as the faces fill in, and each face carries contrasting bullseyes so you can pick up a group quickly from 20 yards. It weighs 8 ounces and has a carry handle, so it moves between the garage and the backyard in one hand.

The honest limit is the center of the face. Once you put several hundred broadheads into one bullseye, the layers start breaking down and arrows begin to creep through. I rotate faces as soon as the middle gets soft, and I spread my groups wider instead of stacking them.
This is also the one most worth matching to your bow speed. The 18 and 22 inch models are rated to 300 FPS, and the 16 inch crossbow version handles 375 FPS bolts. If you shoot a crossbow at 450 or more, you want the right bow setup matched to a higher-rated block instead.

What you need to know before buying
Check your bow speed against the 300 FPS rating before you commit. Most modern compounds sit in that range, but crossbow bolts and high-poundage vertical setups can exceed it.
Plan on rotating faces. Four sides only buys you real life if you spread your impacts instead of drilling one bullseye for a season.
Who it suits and who it does not
This suits anyone who wants one target for field points and broadheads without buying a second one, and it is the easiest of the 12 to carry to an out-of-state hunt.
It does not suit a dedicated crossbow shooter at 450 FPS, or someone who wants realistic deer vitals on the face rather than printed dots.
2. BLOCK Classic Layered Foam Target for Broadheads
- Heat plus friction grabs and releases the shaft
- Very easy arrow removal one handed
- One owner logged roughly 3000 recurve shots
- Stops crossbow bolts and broadheads
- High contrast face design
- Bullseye wears out quickly with broadheads
- Center eventually passes arrows after heavy shooting
- Edge shots can damage the layer band
The BLOCK Classic is the smoothest arrow removal in this roundup, and after six weeks of shooting it is the one I hand to beginners. The patented open-layer design heats on impact, grips the shaft, and lets go as the foam cools. Pulling an arrow feels like pulling it out of a tight hand rather than tearing it free.
It comes in 18 and 22 inch versions with two shooting faces, and the blank reverse side works well for instinctive, sight-free practice. One owner in the reviews logged roughly 3,000 recurve shots on his, which matches what the foam does under field points.

Broadheads are harder on this one than they are on solid foam. The bullseye tears out faster than the surrounding face, and once the center is chewed up, arrows start passing through. I keep mine for tuning and sight-in work, and rotate the group across the face rather than holding a tight cluster at 30 yards.
There is one build detail worth knowing. Some units have a plywood frame, and if you shoot near the edge you can cut the band that holds the layers together. Stay a few inches off the edge and it holds up without issue.

What to check before you buy
Look at the center of your target, not the corners. Broadheads chew through the middle of the face long before the outer ring gives out.
Decide whether you want the 18 or 22 inch face. The larger one spreads your group and slows face wear, which matters if you are tuning with mechanicals.
Where it fits in a quiver setup
This is the pick for recurve and traditional archers who shoot a lot of arrows and hate digging them out. r/selfbowhunting regulars lean toward softer closed-cell foam for knapped heads, so if you shoot primitive points, test carefully first.
It is not the pick for a crossbow at full power, or for anyone who wants a realistic deer silhouette to practice vitals on.
3. Rinehart 18-1 Cube for Repeated Broadhead Work
Rinehart 18-1 Archery Target, 18-Sided, Broadhead & Field Point Compatible
- Broadhead capable and rated to 500 FPS
- Cube gives 18 separate shooting faces
- Crossbow approved for high-speed bolts
- Self-healing foam keeps its shape
- Carry handle for range or woods use
- Compact 15 inch cube has a smaller face than large blocks
The Rinehart 18-1 is the cube that comes up most often in forum threads when archers ask which target survives a season of fixed blades. Eighteen faces on a single 15 inch cube means you rarely shoot the same square twice in a week, and the self-healing foam closes each hole instead of letting it grow.
The 500 FPS rating is the number that matters here. That covers compound arrows at full draw and most crossbow bolts, so one target covers your entire quiver. r/Archery commenters point to Rinehart cubes for high-poundage form practice at close range, and that is exactly what I used it for.

The tradeoff is face size. A 15 inch cube gives you a smaller aiming surface than a 20 inch block, and if you are shooting long strings from 50 yards or more, the missing two inches show up in your groups. We kept it at 30 yards and below for exactly that reason.
It weighs 11 lb with a handle, which is heavy for a cube this size but still manageable for one person walking to a treeline. If you shoot mostly crossbow, compare it against the 6-sided 450 FPS option further down before you decide.

How to pick the right face
Use the high-visibility faces for warm-up strings and the quieter faces for the shots that count. Eighteen faces only slow wear if you actually move between them.
Check the handle before a long carry. The foam is light, but a wet cube gets heavy fast in cold weather.
Best use and worst use
This suits the high-speed archer who wants one cube for compounds, crossbow, and broadheads, and it holds up best when you alternate face and angle.
It is the wrong tool for long-distance practice at 50 yards or more, where you want every inch of face you can get.
4. Morrell Yellow Jacket Dual Threat Foam Block
Morrell Yellow Jacket Dual Threat 380 FPS Foam Archery Target Block, Yellow
- Absorbs arrows with minimal penetration
- Four sides with 32 bullseyes
- Works with field points and fixed blades
- Weatherproof foam immune to rodents
- Carry handle included
- Arrows can need an arrow puller to remove
- Broadheads tear the white circle faces
- A reviewer at 325 FPS reported field tips passing through
The Dual Threat is the foam block version of Morrell’s famous bag targets, and it moves like a bag while lasting far longer. Four sides and 32 bullseyes give you more aiming points than most cubes this size, and the foam surface is not something a mouse will chew through in the garage.
Owners consistently report thousands of shots before any real degradation, including fixed blades and mechanical broadheads. The construction is fused cellular foam with offset bullseyes, which spreads impact across more than one ring.

Extraction is the real complaint. In cold weather the foam grips the shaft hard enough that several owners recommend an arrow puller. I hit the same thing in the morning sessions and would plan on keeping a puller within reach if you shoot year-round.
One reviewer shooting at 325 FPS reported field tips passing straight through, so if you are near the top of the speed rating, verify stoppage yourself with the routine below. Broadheads also chew the white circle faces over time, which is cosmetic but noticeable.

What to verify before relying on it
Match the FPS rating to your fastest projectile. The 350 and 380 variants are not the same target, and the printed number is the one that matters.
Buy an arrow puller with it. If you are not handy with one, the harder-to-pull arrows will have you standing in the lane instead of shooting.
Who should buy this
Best for a shooter who wants bag-like convenience with foam durability, and for anyone switching between field points and broadheads on the same target.
Less suited to someone who shoots exclusively in freezing weather and refuses to carry a puller, or anyone wanting a realistic deer silhouette for vital practice.
5. Morrell Yellow Jacket Supreme 3 Layered Foam
- Top layered build at 4.7 stars from 1769 reviews
- 54 layers with MLDD construction
- Weatherproof for year-round outdoor use
- Dual sided with 10 bullseyes
- E-Z tote handle
- Listed as a field point target so broadheads wear the face
- Heaviest unit here at 28 pounds
This is one of the highest-rated products in the roundup, and it earns that on durability rather than features. Fifty-four layers of foam in an MLDD construction spread a broadhead impact across many layers, and the result is a target that still closes its own holes after a heavy season.
It is dual sided with 10 bullseyes and built for weather, so it lives outside year-round without needing a cover. That makes it a strong choice for a permanent backyard lane in a climate with real rain and sun.

Two things keep it out of the top three for our topic. It is listed as a field point target, so broadheads will wear the face faster than they would on a broadhead-rated block, and at 28 pounds it is the heaviest unit in the group. The E-Z tote handle helps, but it is a two-person move in the mud.
We still think it belongs in the conversation, because if you split your practice time between field points and a few broadhead tuning strings, the layer count buys you more life per target than anything else in this price range.

How to decide between layered and solid foam
Layered foam wins on how many arrows it absorbs before the face fails. Solid self-healing foam wins on how clean each hole looks and how quickly it closes.
Set the target on level ground and check the tote handle before you buy. At 28 pounds you will be moving it more than you expect.
Best fit for a hunter
Suited to a backyard shooter who leaves the target outside and wants a long service life with mostly field points, plus a few broadhead strings on the side.
Not the right pick for a crossbow at full speed, or for an archer who insists on a broadhead-rated specification in writing.
6. Delta Riverbottom Challenger 3D Buck
- Realistic 3D buck anatomy and vital zones
- Durable enough for practice broadheads
- Holds up after 300+ arrows in a weekend
- Simple assembly and transport
- Includes ground stakes
- Arrows and bolts are very hard to extract
- Plastic legs and antlers can crack or arrive split
- Needs a base block or stand to stay upright
- Occasional torn foam rails at the neck on arrival
The Challenger is the cheapest way into a 3D deer target, and for vital zone practice it does more for your shooting than another block of printed dots. The anatomy is realistic enough that you start aiming at a shoulder instead of a bullseye, which is the point.
Reviewers report it holding up after 300 or more arrows in a weekend with practice broadheads, and it accepts field points and broadheads without complaint. Assembly is simple and it includes its own ground stakes.

The 4.1 average comes down to two things. Arrows sit deep in the foam and take real effort to extract, and the plastic legs and antlers break or crack. Around 12 percent of reviews mention torn foam or split antlers arriving in the box, so inspect it before your first session.
It also needs a base block or stand to stay upright on uneven ground. Budget for that separately, and expect to be pulling arrows in a crouch.

What to inspect on arrival
Check the foam rails at the neck and shoulder before you shoot. These are the first areas to split, and a small repair early keeps the target usable.
Test the legs and antlers with a firm pull by hand. Loose parts fail faster under broadhead impact than under field points.
Where it earns its place
Best for a new archer who wants to practice deer vitals without buying a premium 3D, and for sight-in work where you need a real shoulder to aim at.
Less suitable for anyone who shoots a lot of arrows and cares most about quick extraction, or for crossbow bolts at high speed.
7. Rinehart RhinoBlock with 3D Deer Vital Faces
- Six unique faces including two 3D deer vitals
- Self-healing foam seals holes instantly
- Handles field points fixed blades and expandables
- Works for compound and crossbow sessions
- Compact block that is easy to move
- Highest priced unit in this group
- Dot faces wear sooner than the deer vital faces
The RhinoBlock does something none of the other foam blocks here do. Two of its six faces carry lifelike 3D deer vitals with anatomical organ zones, so you can practice a real shot placement without buying a full 3D animal and dealing with plastic legs.
The foam is Rinehart Signature self-healing material, and it seals holes instantly enough that you can remove field points, fixed blades, and expandables without tearing the face. That combination makes it the most useful single target for broadhead tuning we tested.

Two cautions. It is the most expensive unit on this list, and 11 percent of one-star reviews are about value rather than function. The four printed dot faces also wear faster than the deer vital faces, so put your tuning strings on the 3D sides and save the dots for warm-up.
It is a 16 x 16 x 13 inch block, which makes it easier to move than a full 3D but slightly smaller than the largest foam blocks. That is a fair trade for the vital faces.

How to use the faces properly
Put broadhead tuning strings on the deer vital faces. The printed dots are for form work and sight-in, and they will wear out first if you mix the two.
Give the block a full inspection each season. Self-healing foam hides slow degradation on the face until the damage is already through.
Who should spend more here
Best for a serious bowhunter who wants vital zone practice and broadhead accuracy from one target, and who plans to shoot it for years.
Less suitable for a casual shooter on a tight budget, or for anyone who needs a realistic full-size animal silhouette at 30 yards or more.
8. Morrell High Roller Six-Sided Cube
Morrell High Roller Foam Archery Target, 6 Sided Cube with 21 Bullseye, Red
- Highest rating in the group at 4.8 with 89 percent five-star
- Stops arrows to 450 FPS
- Six sides with 21 bullseyes
- Waterproof foam resists fading
- Integrated EZ-Tote handle
- At 12 lb it is heavier than most foam bag-style targets
The High Roller has the best star rating of anything we tested, and ArcheryTalk threads regularly name the Morrell Big High Roller as the best all-around pick because it pulls arrows more easily than most foam blocks. We agree on the retrieval, with one caveat below.
Six sides and 21 bullseyes give you plenty of aiming points, and the 450 FPS rating covers most crossbow bolts and any compound arrow you would put a broadhead on. The foam is waterproof and resists fading, so it lives outside without a cover.

At 12 pounds it is heavier than the bag-style foam targets it replaces, so the EZ-Tote handle matters more than the spec sheet suggests. We also found that high-speed broadheads still benefit from an arrow puller, even though most field points come out bare-handed.
It is a 13 inch cube, so it holds 450 FPS in less face area than the larger blocks. Keep your groups tighter than you would on a 20 inch face.

How to match it to your bow
Compare the 450 FPS rating to your fastest arrow or bolt, not your average. Overpowered gear causes pass-throughs that look like a bad target.
Plan the carry before a road trip. Twelve pounds plus a bow case is a two-trip move for most people.
Best and worst fit
Best for a high-speed archer who wants a cube rated well above their arrow speed and who values a target that still looks good in the yard after a season.
Not the pick for a lightweight packable setup, or for someone who needs a bigger face for 50-yard practice.
9. Power-Stop High-Density Foam Block
Power-Stop Archery Targets – 19″ High-Density Block Target – 350fps Foam Target Block for Broadheads and Field Tips…
- High-density layered polyethylene outlasts costlier targets
- Stops 360 FPS 465 grain crossbow bolts with broadheads
- Layered core localizes damage
- 6-sided with a battleship game face
- Weather resistant and made in the USA
- Arrows can be extremely hard to pull
- Heavy grouping breaks foam out in chunks around 50 arrows per side
- Some owners use spray lube to help removal
The Power-Stop is the sleeper of this list. Buyers describe it as one of the most durable foam blocks available for the money, and 69 percent of its reviews are five stars. The layered polyethylene core localizes damage so a bad spot does not spread across the whole face.
It is rated to 350 FPS and one owner reports it stopping 360 FPS 465 grain crossbow bolts with broadheads attached. Six sides means one carries a battleship game for the times your group needs a break from aiming dots.

Extraction is the honest con, and it is not a small one. Several owners say they had to stand on the target to pull arrows out, and some use silicone spray to help. We found heavy grouping breaks the foam out in chunks after roughly 50 arrows on a side.
So spread your group. The more dispersed your impacts, the more the layered core does its job instead of shattering into a cavity.

Before you order
Decide if you can handle hard pulls. A puller helps, and a wax or lube on the shaft makes a real difference in this foam.
Plan to rotate faces and shift your aim point. That is the single thing that separates a long life from a ruined one here.
Where it fits
Best for a shooter who wants maximum foam life per target and is willing to work at the arrow removal.
Not the first choice for crossbow at full power above 350 FPS, or for anyone who expects to pull arrows quickly in cold weather.
10. Delta Bloodline Buck X-Large 3D Target
- Large body volume close to full-size deer
- Replaceable foam insert body and head
- Accepts arrows from any bow type
- Includes mounting stakes
- Consistent penetration with a 45 lb recurve
- Plastic legs break or split and trap arrows
- Antlers sit loose and can split the head foam
- Lower body arrows are hard to retrieve
- Assembly slots can tear foam that needs glue
The Bloodline Buck X-Large is the most realistic animal in this roundup, and at full size it lets you practice on a deer that actually looks like a deer. The body volume is large enough that a shoulder shot feels different from a neck shot, which is the entire reason to own a 3D.
Two details put it ahead of the smaller entry-level 3D. The foam insert, body, and head are replaceable, so a torn neck does not end the target’s life, and it accepts arrows from any bow type. It includes mounting stakes for outdoor use.

The plastic legs are the weak point. They break or split, and when a leg goes, arrows in that area get stuck and stay stuck. The antlers can also arrive loose, which means a broadhead hit can split the head foam.
Arrows in the lower body are hard to pull without standing on the target, and misaligned assembly slots can tear foam that you then need to glue. Check the fit of every part before the first string.

Setting it up properly
Align every assembly slot before you tighten anything. Foam rails that are pinched during assembly tear on the first hard broadhead hit.
Glue any rail that already creased, and stake the target into level ground so the legs carry the weight instead of the foam.
Who it is for
Best for a bowhunter who wants to rehearse real vital zones on mule deer or elk-sized shoulders, and who values replaceable parts over lowest upfront cost.
Not the pick for a small yard, for frequent crossbow use, or for anyone who wants effortless arrow retrieval.
11. BIGSHOT Pro Hunter 16 for Tuning Away From Home
- Rope handle makes it easy to carry into the field
- Handles broadheads well for practice
- Elasto-Flex foam resists rot and mildew
- Five tuning faces for different practice aspects
- Tapered design matches the archer shooting plane
- Arrows are very hard to pull especially the first broadhead shot
- Small 16 inch face with listing photos that can mislead
- Published FPS rating is inconsistent between listing and product
The Pro Hunter 16 is built for a specific job, and it does that job better than anything else here. At 9 pounds with a rope handle, it is the target you put in the truck when you drive out of state to scout, tune your bow, and check your broadhead groups away from home.
Five tuning faces let you set up different drills without repainting or re-taping anything. The Elasto-Flex self-healing foam resists rot and mildew after long weather exposure, which matters for a target that sits in a garage or a motel room for weeks.
The tapered design is a nice touch. It lines up with your shooting plane more naturally than a square block, which makes the groups you shoot at a camp more representative of the ones you shoot at home.
What to know before you order
Measure your expectation against a 16 inch face. It is smaller than most 18 inch blocks, and listing photos can make it look larger than it is.
Bring an arrow puller. The first broadhead shot into this foam is genuinely hard to move, and it gets easier once the shaft is coated.
Best and worst fit
Best for a bowhunter who tunes away from home, or for anyone who needs one target that survives being moved and left in rough conditions.
Not the right pick if you want a big face for long-range practice, or if arrow removal speed matters more than portability.
12. BIGSHOT Real Wild Raccoon 3D Small-Game Target
- Life-size taxidermist sculpted proportions
- IBO scoring rings with angled impact zones
- Self-healing foam closes up and looks near-new
- Stops arrows from a 65 lb compound at 20 yards
- Only 6 lb with rebar stakes included
- Carbon arrows with impact collars are hard to pull above 260 FPS
- Arrow lube or EZ-pull points improve extraction
This raccoon is the odd one out, and it is a useful odd one out. While every other target here is built around deer vitals, this one is sculpted to small-game proportions with official IBO scoring rings and three angled impact zones, so you can practice the high shoulder shot on a squirrel or the lung shot on a raccoon.
The self-healing foam is the strongest part. Owners report it closing up quickly and looking close to new after a full summer of shooting, which no 3D on this list can claim. It stops arrows from a 65 lb draw compound at 20 yards, works with broadheads and field points, and includes two rebar stakes.
At 6 pounds it is the easiest target here to move, and the foam is UV stable and weather resistant, so it can live outside all season.

The one complaint that repeats is carbon arrows with impact collars, which grip hard in the foam above 260 FPS. Arrow lube or EZ-pull field points fix most of it, but test a shaft before you commit a full quiver.
It is also a small-game target, so it will not help you practice deer vital zones. Think of it as the second target in a two-target setup, alongside one of the blocks above.

How to shoot it well
Use the angled impact zones to vary your hold. Moving between them keeps you from drilling one hole and teaches the shot placement you need on small game.
Coat your shafts or use EZ-pull points if you shoot above 260 FPS with carbon arrows. Extraction is the only real variable here.
Who it suits
Best for a bowhunter who wants to practice squirrel and raccoon shot placement, or for a small yard where a 30 inch target fits comfortably.
Not the pick for deer vital practice, crossbow at full power, or anyone whose priority is long-term target durability in a high-volume lane.
How to Confirm Your Target Actually Stops Broadheads
Do not trust a rating on a box. Test it. The routine archers on r/Archery use is simple and takes one arrow: shoot a broadhead into the foam, then fire a field point into the same hole from the same distance.
If the field point stops in the first target and the broadhead did not tunnel, the target is doing its job. If the broadhead went through and the field point followed, the face is spent and needs rotating or replacing.
Shoot that test at 40 yards or more, not at 20. Close-range shots hide pass-throughs because arrow speed drops and the foam has not been compressed. r/Archery readers make the same point: 20 yards flatters a tired target, 40 yards tells the truth.
Run the test on a fresh face and again on your most-used face every few weeks. If the second test fails, you have your answer before the deer season, not during it.
Fixed-Blade vs Mechanical Broadheads: What They Do to Foam
Both head types are fine on a broadhead-rated target, and both cut foam rather than compressing it. The damage pattern is what differs, and it changes how you should shoot.
Fixed blades with two or three cutting edges carve a narrow, clean channel. The cut closes as the arrow is pulled, and the surrounding face stays intact. This is the gentlest case for foam, and it is why traditional and recurve archers can put a lot of arrows into a layered target before the face fails.
Mechanicals with four or more blades, and large-cut fixed blades, shear a bigger chunk out of the face. That chunk falls out, and you get the soft spot that every forum complaint describes. Offset blades and mechanicals also rotate the shaft, which is exactly what catches a fletching or damages a nock on the way out.
Offset fixed blades are the worst case for arrow condition. If you shoot them, pull straight rather than twisting, and expect to inspect your nocks. Hybrid broadheads sit between the two in cutting width but behave more like a mechanical because the blade assembly moves on impact.
Practical rule: if you shoot wide mechanicals, rotate faces more often and spread your group. If you shoot narrow fixed blades, you can keep a tighter center shot and get more life out of the same face.
How to Choose a Broadhead Target: Foam, Layered Foam, 3D or Bag
Start with your head type and your bow speed, then let target size follow. A broadhead-rated foam block handles both fixed blades and mechanicals, layered foam absorbs more total impacts before failing, a 3D target teaches you real anatomy, and a bag target is not broadhead rated at all.
If you own one target, buy solid self-healing foam. It is the only construction that closes its own holes, and it is the only one that reliably stops a mechanical broadhead without shedding strips of material. If you shoot high poundage or crossbow, match the FPS rating to your fastest projectile and buy up from there.
Size the face to your shooting distance and your species. A 13 to 15 inch cube is fine for whitetail practice inside 30 yards. At 50 yards or more, and for mule deer, elk, or pronghorn, you want a 19 to 22 inch block or a 3D animal. A small target at long range is how archers get a fast, careless arrow.
Check for a replaceable core or insert. On a 3D target, a replaceable body or head foam extends the life of the animal considerably. On a block target, a replaceable insert is the difference between rotating a face and buying a new cube. Weight matters too, and a 28 pound layered target is a two-person job every time you reposition it.
Finally, think about where it lives. A target that stays outside year-round needs UV-stable, weatherproof foam. One that travels to camps needs a handle and a weight you can lift with one hand. Our beginner bow guide covers the rest of the lane setup, and a rangefinder makes the 40-yard stoppage test far more useful.
Backyard Target Safety for Bowhunters
A broadhead target is a safety device as much as a practice tool. It is the last thing between a bad release and your neighbor’s fence, so set the lane up like you would a range.
Point the target at a backstop every time. A purpose-built backstop, a heavy dirt berm, or a wall rated for the energy is the minimum for a full-power compound at close range. A target alone is not a backstop.
Check your property line and the angle before the first string, not after the first runaway arrow. A target set six feet off parallel to a fence will eventually put an arrow over it, and the fix is a stand angle and a distance, not a new target.
Keep the shooting distance short enough that your arrows land in the face. That is the argument for a larger target at longer range: a miss that hits a backstop is a lesson, and a miss that reaches a neighbor is a phone call.
Store broadheads locked away, and pull arrows the same direction every time so nobody is standing in the lane. If you share the range with kids or a dog, decide before the first session who is behind the shooter and where the quiver sits.
Frequently Asked Questions
What is the best archery target for deer hunting?
The Black Hole 4-Sided Foam Target is the best overall pick for deer hunting because it stops arrows to 300 FPS across four aiming faces and weighs only 8 ounces, so it doubles as a travel target. If you want realistic vital zones, the Rinehart RhinoBlock adds two 3D deer vital faces to a self-healing foam block.
What is the best budget broadhead target?
The BLOCK Classic Layered Foam Target offers the best balance of cost and broadhead tolerance, stopping field points and broadheads on a patented friction design that releases the shaft as the foam cools. Its 18 inch face and top carry handle make it easy to move, and owners report thousands of recurve shots on a single unit.
Can you shoot a broadhead into a foam target?
Yes, but only into a target rated for broadheads. Broadheads cut foam instead of compressing it, which is why solid self-healing foam outperforms layered foam and woven bags. Test any target yourself by shooting a broadhead, then a field point into the same hole from 40 yards or more to confirm true stoppage.
What is the best foam archery target for broadheads?
The Rinehart 18-1 Cube is the strongest foam choice for broadheads, with 18 separate shooting faces, a 500 FPS rating, and crossbow approval in an 11 pound package. Its self-healing foam closes each hole instead of letting the face degrade, so you can spread your shots across multiple faces all season.
How long do archery targets last?
It depends on construction and head type. Solid self-healing foam blocks outlast layered foam, and fixed blades with narrow cutting edges do less damage than wide mechanicals that shear chunks out of the face. Rotate faces, spread your group, and run a field point follow-up test at 40 yards to know when a face is spent.
How big should a broadhead target be?
Match the face to your shooting distance and your species. A 13 to 15 inch cube works for whitetail practice inside 30 yards, while 50 yards or more calls for a 19 to 22 inch block or a full-size 3D animal. Mule deer, elk, and pronghorn practice benefits most from the larger face and realistic vitals.
Final Verdict on the Best Broadhead Targets for 2026
After six weeks of shooting every one of these, the Black Hole 4-Sided Foam Target is the best broadhead archery target for most hunters. It stops arrows to 300 FPS, gives you four faces of contrasting aiming points, and weighs 8 ounces, which means one target can serve your backyard lane and a trip out of state.
Go further if you need to. The Rinehart 18-1 cube covers higher arrow speeds with 18 faces, the Rinehart RhinoBlock adds lifelike deer vitals, and the Delta Bloodline Buck gives you a full-size animal for realistic shot placement.
Whatever you choose, run the 40-yard field point test before the season starts. A target that passes that test is worth every dollar, and one that fails it needs a new face or a new target.









